Please double-click on an item to purchase it.
10-32 thread extensions machined on a 0.355-0.375" 60 degree flat. Fits Factory barrels and allows you to easily mount your forearms to your barrel. Simple to install by milling a 0.060" deep 60 degree dovetail on the bottom of your Contender barrel. These slots can also be hand filed without much effort.
Contender locking bolts (2-piece) fit both EVA and TC hinge blocks
One of the most difficult processes to do if you don't have a milling machine with a rotating head, is to cut the extractor slot in the barrel. This vise was developed to fit on a quick change tool post and allow this small slot to be cut with a 3/16 inch end mill held in the three jaw chuck. It is adjustable so that it can fit on many sizes of quick change posts with 60 degree dovetails and uses the common thumb nut with locking wing nut to set the height of the cut. The stubbed barrel is held in the vise with two thumb screws. It is very simple to use and to set up. It also makes a very handy stub wrench for screwing the stub on and off a barrel without marring the hinge block.
The Stub allows a gunsmith or skilled hobbyist to create custom barrels for the TC Contender. For the first time, if you have a metal lathe and can cut barrel threads for a bolt action rifle you can make TC Contender barrels. This Stub Kit comes with locking lugs, springs and a generic extractor. New updated design is simpler and faster to do, provides more barrel diameter and allows a single product inventory to carry. Our thanks to the gunsmiths that have offered their wisdom to make this a better and more useful product.
The Stub allows a gunsmith or skilled hobbyist to create custom barrels for the TC Encore. For the first time, if you have a metal lathe and can cut barrel threads for a bolt action rifle you can make TC Encore barrels. This Stub Kit comes with locking lugs, springs and a generic extractor.
Encore locking bolts (2-piece)
Black anodized Aluminum replacement magazine for the Remington 591M Rifle. (Release date soon)
5MM Craig full-length reloading die set (2-die set)
Shellholder for 5MM Craig Cases