5MM Craig Special for Thompson Center Contender and Encore actions on the Contender this will work for 5MM Remington Rimfire Magnum also

    OK this why we started doing barrels, we now do many other calibers, see below.  

We generally use a 1-12" twist rate on the 5MM Craig.  This make a great carry gun and is very flexible on the bullets you can load for it. 

See our Jackrabbit and Prairie Dog hunting stories if you have not already. 

• We can furnish a 5MM Craig for either the Contender or the Encore action with any barrel length up to 22",  CeraKoted Barrel, bull or straight taper.  We try to keep constant pricing but our prices vary so your price could reflect a change in our barrel cost.  We will confirm the final purchase price with order is made.
• We have had great luck with the McGowen, Shilen and Douglas barrels, prices will be adjusted for barrel cost, just let us know what you prefer, it is your rifle or pistol, not ours and we know that.
• 5 ¾” Picatinney Rail mounted on rifle barrel for scope.  Pistol Barrels are equipped with shorter rails.
• Iron sights are extra and bid on each job. 
• Eleven degree recessed target crown is usually used.  We can do others.
• Octagon or fluted barrels are $125.00 more.   
• Stainless steel barrels are $85.00 more. 
• Other coatings and finishes can be done if agreed upon before we start. 
• Work to be done will be documented and agreed upon in writing by both parties before we start. 
• We require 50% deposit upon placing the order and the rest of the money before we ship.
• We fit your barrel and test with our actions so you don’t loose the use of your TC while we work on the barrel.
• Pistol barrel lengths longer than 10” still use a full barrel, for a 10” or shorter barrel deduct $25.00. 

Other calibers that we are chambering for:

 The Reamer Deal, If we do not have a reamer that you want I will split the cost for that reamer with you which will be ($74.00) or if you can get a couple of friends to order the same chambering at the same time,( minumum 3 (three) barrels) there will not be a reamer surcharge.  In all cases Eagle View arms keeps the Reamer for future use.  We can also make a perfect FL resizing die with the chamber reamer this process gives a roughly 0.002" reduction in diameter over the chamber sizing.  This lowers the cost of developing a wildcat cartridge a lot.  It takes about three weeks to get a reamer ground and shipped here.

We have reamers for:

1. 5MM Craig
2. 20 AI Hornet
3. 20/233 AI
4. 20 Dasher
5. 6MM Dasher
6. 257 Ackley Improved
7. .22 Win Magnum
8. 357 Magnum (rifle)
9. 30-30 Win
10. 308 Win
11. 30-06 Springfield
12. .45 ACP Pistol